Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: How to enable/disable the I-BSI system
- Press the
button until “Settings” appears, then press the scroll dial. - Select “Driver Assistance” using the scroll dial.
- Select “Blind Spot Assist” and press the scroll dial.
- Select “Intervention” to enable or disable the I-BSI system.
4. Push the ProPILOT Assist switch to turn the system on or off.
NOTE:
Turning on the ProPILOT Assist system will automatically activate both the I-BSI and I-LI systems.
If the BSW system is turned off, the I-BSI system will also be deactivated.
I-BSI system operation
Side indicator light
I-BSI ON indicator
I-BSI warning indicator
Vehicle information display
ProPILOT Assist switch
The I-BSI system functions above approximately 37 MPH (60 km/h).
If a ...
I-BSI system limitations
WARNING
The following limitations apply to the Intelligent Blind Spot Intervention system. Failure to operate your vehicle in accordance with these limitations could result in serious injury or death ...
Other materials:
Power window and door lock/unlock switch RH
Removal and Installation
REMOVAL
Remove the front door pull handle bracket (RH). Refer to INT-15,
"Removal and Installation".
Release pawls using a suitable tool (A) and remove front door
power window and door lock/unlock switch finisher (RH) (1).
: Pawl
D ...
Fender protector
FENDER PROTECTOR
FENDER PROTECTOR : Exploded View
Front fender protector
Engine side cover
Front fender
Over fender
Clip
Front
FENDER PROTECTOR : Removal and Installation
REMOVAL
Remove wheel and tire using power tool. Refer to WT-60, "Removal and
Install ...
Continuously Variable Transmission (CVT) fluid
If CVT fluid inspection or replacement is needed, it is recommended to have the work performed by a NISSAN dealer.
CAUTION
NISSAN recommends using Genuine NISSAN CVT Fluid NS-3 (or an approved equivalent) ONLY for CVT-equipped models. Do not mix with other fluids.
Do not use ATF or Manual Transm ...
