Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: How to enable/disable the BSW system
- Steering-wheel controls
- Vehicle information display
Steps:
1. Press the
button until “Settings” appears, then press the scroll dial. Select “Driver Assistance” and confirm.
2. Select “Blind Spot Assist” and press the scroll dial.
3. Choose “Warning” and confirm to toggle the system on or off.
NOTE: Settings remain saved even after the engine is restarted.
BSW system operation
Side indicator light
BSW indicator on the display
Vehicle information display
Steering-wheel-mounted controls
The BSW system becomes active above approximately 20 MPH (32 km/h). When a vehi ...
BSW system limitations
WARNING
Understanding the limitations of the Blind Spot Warning system is essential to avoid accidents or serious injury.
The Nissan Rogue BSW system cannot detect all vehicles under all conditions ...
Other materials:
LDW system limitations
WARNING
Not all conditions allow the LDW system to function properly. Misuse can lead to an unsafe driving situation.
The system will not work below 37 MPH (60 km/h) or when lane markings are not visible.
Do not rely on LDW under conditions such as heavy rain, snow, ice, narrow roads, temporary ...
Automatic operation
Cooling and/or dehumidified heating
(AUTO)
This mode may be used all year round as the
system automatically works to keep a constant
temperature. Air flow distribution and fan speed
are also controlled automatically.
Press the AUTO button on. The indicator on
the button will illumin ...
Diagnosis system (BCM) (without intelligent key system)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic ...
