Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Hood
WARNING
- Make sure the hood of your Nissan Rogue is fully closed and latched before driving.
- Do not open the hood if steam or smoke is coming from the engine compartment.
1. Pull the hood lock release handle 1 located below the driver’s side instrument panel to slightly raise the hood of the Nissan Rogue.
2. Push the lever 2 under the hood sideways with your fingertips.
3. Raise the hood fully.
4. Remove the support rod and insert it into slot 3.
Hold the coated parts A when handling the support rod of the Nissan Rogue hood, as metal parts may be hot after the engine is turned off.
When closing the hood:
1. Support the hood and return the support rod to its original position.
2. Lower the hood to about 8–12 in (20–30 cm) above the lock and let it drop.
3. Ensure the hood of the Nissan Rogue is securely latched.
Remote engine start
Basic information
The remote engine start button is located on the Intelligent Key of the
Nissan Rogue, if equipped. This feature allows you to start the engine from outside
the vehicle, ensuring ...
Liftgate
...
Other materials:
P0712 transmission fluid temperature sensor A
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0712
FLUID TEMP SENSOR A
(Transmission Fluid Temperature Sensor A Circuit
Low)
When all of the following conditions are satisfied and this state is ...
Automatic brake hold
Basic information
The automatic brake hold function keeps the vehicle stopped without requiring the driver to hold the brake pedal. When the accelerator pedal is pressed, the system releases the brake automatically. This convenience feature improves comfort in stop-and-go traffic, especially in a Ni ...
ECU diagnosis information
AUDIO UNIT
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
...
