Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Hill Start Assist system
WARNING
- Never rely solely on the Hill Start Assist system to keep the Nissan Rogue from rolling backward on a hill. Always remain attentive, apply the brake pedal when stopped on steep inclines, and use extra caution on icy or muddy slopes. Failure to prevent rollback could result in loss of control and serious injury or death.
- Hill Start Assist is not designed to hold the vehicle stationary on an incline. Always keep your foot on the brake when stopped. Allowing the Nissan Rogue to roll backward may lead to a collision or personal injury.
- The system may not prevent rollback under all road or load conditions. Be prepared to depress the brake pedal at any moment to stop the vehicle. Relying only on the system may lead to serious personal injury.
The Hill Start Assist system helps prevent the vehicle from rolling backward for a brief moment while the driver transitions from the brake pedal to the accelerator on a hill.
The system operates automatically when the following conditions are met:
- The transmission is in a forward or reverse gear.
- The Nissan Rogue is completely stopped on an incline while the brake is applied.
The system will hold the brakes for up to 2 seconds.
After this period, the vehicle may begin to roll backward and Hill Start Assist will fully disengage.
The Hill Start Assist system does not function when the transmission is in N (Neutral) or P (Park), or when the vehicle is on level ground.
If the slip indicator light illuminates on the meter, Hill Start Assist will not operate.
Chassis control
Basic information
The chassis control system in the Nissan Rogue uses an electric control module that manages the following functions:
Intelligent Trace Control
Active Ride Control (if so equipped) ...
Hill descent control system
Basic information
WARNING
Never rely solely on Hill Descent Control (HDC) to manage vehicle speed on steep downhill descents. Always remain alert, apply the brake pedal if needed, and use extra caut ...
Other materials:
Coil spring
Exploded View
Upper seat
Coil spring
Lower seat
Rubber washer (LH/RH)
Rear suspension arm
Front
Removal and Installation - FWD
REMOVAL
Remove the rear wheel and tire using power tool.
Remove the bolt and separate the rear wheel sensor from the wheel h ...
Basic information
CAMERA button
WARNING
Failure to follow the warnings and instructions for proper use of the Moving Object Detection (MOD) system could result in serious injury or death.
The MOD system is not a replacement for safe driving practices. Always check surroundings with mirrors and direct observat ...
Unit removal and installation
ENGINE ASSEMBLY
Exploded view
Engine mounting insulator (RH)
Upper torque rod (RH)
Engine mounting bracket (RH)
Lower torque rod
Torque rod bracket
Engine mounting insulator (LH)
Removal and installation (FWD)
WARNING:
Situate the vehicl ...
