Nissan Rogue manuals

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Flat towing your vehicle

Flat towing for All-Wheel Drive vehicle

Towing a vehicle with all four wheels on the ground is known as flat towing. This method is sometimes used when a vehicle, such as a Nissan Rogue AWD, is pulled behind a motorhome or recreational vehicle.

CAUTION

Flat towing for Front-Wheel Drive vehicle

Basic information

Towing your vehicle with all four wheels on the ground is often called flat towing. This method is sometimes used when a vehicle, such as a Nissan Rogue, is pulled behind a recreational vehicle or motor home.

CAUTION

Continuously Variable Transmission (CVT)

To tow a vehicle equipped with a CVT, an appropriate vehicle dolly MUST be placed under the drive wheels of the towed vehicle. This includes CVT-equipped models like the Nissan Rogue.

Always follow the dolly manufacturer's recommendations when using their product.

Towing load/specification
WARNING The towing capacities in this manual are general guidelines. Actual safe towing capacity of your Nissan Rogue depends on factory or dealer-installed equipment, passenger load, and cargo weight ...

Uniform tire quality grading
DOT (Department Of Transportation) Quality Grades: all passenger car tires, including those fitted to the Nissan Rogue, must conform to federal safety requirements in addition to these grades. Where ...

Other materials:

Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). Refer to “Flat tire” in the “In case of emergency” section in this manual for tire replacing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. ...

Excessive operation frequency
Description VDC function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) function, Brake assist function, hill start assist function or Brake force distribution function operates in excessive operation frequency. Diagnosis Procedure 1.CHECK BRAKING FORCE Ch ...

Seat belt warning system
Seat Belt Warning System Does Not Function 1.SEAT BELT WARNING LIGHT Turn ignition switch ON. Does the seat belt warning lamp come ON? YES >> GO TO 2. NO >>  Check 10A fuse [No. 13, located in the fuse block (J/B)].  Check seat belt buckle switch (driver seat). ...

© 2014-2025 Copyright t32.nirogue.com