Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Driver Monitor
Basic information
On ProPILOT Assist 2.1 equipped Nissan Rogue models, the system monitors the driver’s attention to the road ahead with a driver-facing camera located on the steering column. The system observes head position and direction, eye opening, and eye direction. If the system determines that the driver is not looking ahead, a series of warnings will be displayed to draw the driver’s attention back to the road.
NOTE:
The driver monitor is active in all driving modes on the Nissan Rogue, not only when ProPILOT Assist 2.1 is engaged.
If the driver’s face is below the camera’s detection range A, the driver monitor may not function correctly. Adjust your seating position or steering column height so that the camera can clearly detect your entire face.
License information
The driver monitoring system includes software that uses open source software (OSS). License information can be found at the website below.
http://www.embedded-carmultimedia.jp/RTOS/License/oss/DMS_0401/
Hands on detection
Basic information
When Steering Assist is activated, the vehicle monitors the driver's steering wheel operation using capacitive and torque sensors in the steering wheel. When ProPILOT Assist is opera ...
Attention to the road
On ProPILOT Assist 2.1 equipped Nissan Rogue vehicles, the camera-based driver monitor system is used to check whether the driver is watching the road ahead. It is always the driver’s responsibility ...
Other materials:
Continuously Variable Transmission (CVT) fluid
CAUTION
NISSAN recommends using Genuine
NISSAN CVT Fluid NS-3 ONLY in
NISSAN CVTs. Do not mix with other
fluids.
Do not use Automatic transmission
fluid (ATF) or Manual transmission fluid
in a NISSAN CVT, as it may damage the
CVT. Damage caused by t ...
P0603, P062F ECM
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P0603
ECM BACK UP/CIRCUIT
[Internal Control Module Keep Alive Memory
(KAM) Error]
ECM buck up system does not function properly.
P062F
...
Glove box lamp
Bulb Replacement
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being
turned OFF to prevent burns.
CAUTION:
Do not touch the glass of bulb directly by hand. Keep grease
and other oily substances away from
bulb surface.
Do not leave bulb ...
