Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Corrosion protection
Most common factors contributing to vehicle corrosion
- Moisture-retaining dirt and debris build-up inside body cavities or seams.
- Paint or coating damage caused by gravel, small stones or minor collisions.
Environmental factors influencing corrosion rate
Moisture
Sand, dirt and water accumulation on the underside of your Nissan Rogue can accelerate corrosion. Wet floor carpeting should be removed and dried fully.
Relative humidity
Corrosion develops faster in humid climates, especially where temperatures stay above freezing or where road salt is used.
Temperature
Higher temperatures increase corrosion speed in poorly ventilated areas.
Air pollution
Industrial pollution, coastal salt air or heavy use of road salt will accelerate corrosion of metal surfaces.
Road salt can also cause faster deterioration of painted areas.
To protect your vehicle from corrosion
- Wash and wax the Nissan Rogue regularly to remove contaminants.
- Repair minor paint damage as soon as possible.
- Keep drain holes at the bottom of the doors clear.
- Inspect the underbody for dirt or salt buildup and wash promptly if present.
CAUTION
- NEVER wash the interior with a hose — remove dirt with a vacuum cleaner.
- Do not allow water to come into contact with electronic components inside the vehicle.
De-icing chemicals used on roads are extremely corrosive and will accelerate deterioration of underbody parts such as brake lines, exhaust system, floor panels and suspension components.
During winter, the underbody should be cleaned regularly.
For additional corrosion protection where needed, consult a NISSAN dealer.
Cleaning interior
Basic information
From time to time, remove loose dust from the interior trim, plastic elements and seats of the Nissan Rogue using a vacuum cleaner or a soft-bristle brush.
Vinyl and leather areas ...
Do-it-yourself
...
Other materials:
P0335 CKP sensor (POS)
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting conditio
P0335
CKP SEN/CIRCUIT
(Crankshaft position sensor ″A″ circuit)
The crankshaft position sensor (POS) signal is not detected by
...
Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
DETAILED FLOW
1.COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the
condition and the environment when
the incident/malfunction occurred) using the diagnosis worksheet.
>> GO TO 2.
2. ...
Exterior front
Front view camera (if so equipped)
Engine hood
Windshield wiper and washer switch, wiper blades
Windshield-washer fluid
Windshield
Power windows
Door locks, NISSAN Intelligent Key® (if so equipped), NISSAN Jackknife
key (if so equipped), key ...
