Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: BSW system operation
- Side indicator light
- BSW indicator on the display
- Vehicle information display
- Steering-wheel-mounted controls
The BSW system becomes active above approximately 20 MPH (32 km/h). When a vehicle enters the detection zone, the side indicator light turns on.
If the driver activates the turn signal, the system warns with two chimes and flashes both the side indicator light and the BSW display indicator. Flashing continues until the vehicle exits the detection zone.
The side indicator briefly lights up at ignition ON as a system check. Its brightness adjusts automatically depending on ambient lighting conditions.
Basic information
WARNING
Failure to follow the warnings and instructions for proper use of the Blind Spot Warning system could result in serious injury or death.
The BSW system is not a substitute for safe driving ...
How to enable/disable the BSW system
Steering-wheel controls
Vehicle information display
Steps:
1. Press the
button until “Settings” appears, then press the scroll dial. Select “Driver Assistance” and confirm.
2. Sel ...
Other materials:
Hands on detection
Basic information
When Steering Assist is activated, the vehicle monitors the driver's steering wheel operation using capacitive and torque sensors in the steering wheel. When ProPILOT Assist is operating in hands-on (green) mode and the steering wheel is not operated, or the driver removes their ha ...
Removal and installation
NATS ANTENNA AMP.
Removal and Installation
REMOVAL
Remove the steering column covers. Refer to IP-17, "Removal and
Installation".
Disconnect the harness connector from the NATS antenna amp.
Release pawls and remove NATS antenna amp. (1) from the
ignition sw ...
Available views (models with 3D view)
WARNING
The distance guide lines and the vehicle width guide lines should be used as a reference only when the Nissan Rogue is on a paved, level surface. The apparent distance on the monitor may differ from the actual spacing between the vehicle and surrounding objects.
Use the displayed lines an ...
