Nissan Rogue manuals

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Basic information

WARNING

Failure to follow the warnings and instructions for proper use of the Blind Spot Warning system could result in serious injury or death.

The Blind Spot Warning feature on the Nissan Rogue assists the driver by detecting vehicles in adjacent lanes and notifying the driver before lane changes.

Nissan Rogue Blind Spot Warning

The system uses rear-mounted radar sensors A located near the bumper to scan both sides of the vehicle.

Nissan Rogue Blind Spot Warning Detection Zone
Detection zone

The detection area begins from the outside edge of the side mirrors and extends roughly 10 ft (3 m) behind and 10 ft (3 m) to each side. When another vehicle approaches quickly from behind, the monitored area expands automatically.

Blind Spot Warning (BSW)
...

BSW system operation
Side indicator light BSW indicator on the display Vehicle information display Steering-wheel-mounted controls The BSW system becomes active above approximately 20 MPH (32 km/h). When a vehi ...

Other materials:

P0850 PNP switch
Description Transmission range switch is turn ON when the selector lever is P or N. ECM detects the position because the continuity of the line (the ON) exists. DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition ...

P0327, P0328 KS
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0327 KNOCK SEN/CIRC-B1 (Knock sensor 1 circuit low bank 1 or single sensor) An excessively low voltage from the knock sensor is sent to ECM. ...

Cockpit
Steering Assist switch* (models with ProPILOT Assist) — activates steering support features available on the Nissan Rogue.* Head Up Display (HUD) switch* — controls the HUD system that projects key driving information onto the windshield.* Headlight and turn signal switch — operates ...

© 2014-2025 Copyright t32.nirogue.com