Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Basic information
Drive Mode Selector: 2WD models
Drive Mode Selector: AWD models
Vehicle information display: 2WD models
Vehicle information display: AWD models
The Nissan Rogue offers multiple driving modes that can be selected using the Drive Mode Selector.
2WD models include SPORT, STANDARD, and ECO modes. To switch between modes, push the selector up or down.
AWD models include OFF-ROAD, SNOW, AUTO, ECO, and SPORT modes. To change the mode, turn the Drive Mode Selector left or right.
NOTE:
After selecting a mode, the change may not activate immediately. This is not a malfunction.
The selected mode appears on the vehicle information display. A mode list also appears for selection and will close automatically after a few seconds.
The STANDARD/AUTO mode will be selected each time the Nissan Rogue ignition switch is placed in the ON position.
If the mode does not switch when the ignition is ON, have the system checked at a NISSAN dealer.
WARNING
- Do not stare at the Drive Mode Selector or display while driving; focus must remain on operating the Nissan Rogue safely.
- Avoid sudden acceleration, harsh steering, or abrupt braking, especially on slippery surfaces, to prevent tire slip or skidding.
OFF-ROAD mode (AWD models)
Enhances control when driving on uneven dirt roads, steep inclines, or sand.
CAUTION
Do not use OFF-ROAD mode on dry pavement as it may overload the powertrain, increase tire wear, and lower fuel econ ...
Other materials:
Flexible seating
WARNING
Never allow anyone to ride in the cargo
area or on the rear seats when they are
in the fold-down position. In a collision,
people riding in these areas without
proper restraints are more likely to be
seriously injured or killed.
Do not allow peo ...
Removal and installation
HORN
Exploded View
Horn (LOW)
Horn (HIGH)
Removal and Installation
REMOVAL
Horn (LOW)
Remove the front grille. Refer to EXT-23, "Removal and
Installation".
Disconnect the harness connectors from the horn (LOW).
NOTE:
Before disconnecting the harn ...
Rear window defogger relay
Description
Power is supplied to the rear window defogger with BCM control.
Component Function Check
1. CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT
Check that an operation noise of rear window defogger relay [located in fuse
block (J/B)] can be heard when
turning the rear window def ...
