Nissan Rogue manuals

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Basic information

Nissan Rogue. Moving Object Detection (MOD)

  1. CAMERA button

WARNING

The MOD system alerts the driver to moving objects around the Nissan Rogue when maneuvering in areas such as garages, parking lots, or tight spaces.

The system detects motion by processing images from the vehicle’s cameras and highlights movement on the display.

MOD system operation (models without 3D view)

The MOD system activates automatically under the following conditions:

The MOD system operates in these situations when a camera view is shown:

The MOD system does not detect motion in the front-side or rear-side views (if equipped). No MOD icon will be shown in those views.

When the MOD system detects a moving object, a yellow frame appears on the corresponding area of the display and a single chime sounds. If movement continues, the yellow frame remains visible.

NOTE:

While the RCTA (Rear Cross Traffic Alert) chime is sounding, the MOD system will not chime.

Nissan Rogue. Moving Object Detection (MOD)
Front and bird's-eye views

Nissan Rogue. Moving Object Detection (MOD)
Front and front-side views (example)

Nissan Rogue. Moving Object Detection (MOD)
Rear and bird's-eye views

Nissan Rogue. Moving Object Detection (MOD)
Rear and front-side views

Nissan Rogue. Moving Object Detection (MOD)
Front-wide view / rear-wide view

In bird’s-eye view, the yellow frame 1 highlights the area (front, rear, left, right) where moving objects are detected.

The yellow frame 2 appears in the front, rear, front-wide, and rear-wide views when movement is detected.

A green MOD icon 3 is shown in the view where the MOD system is active.

A gray MOD icon 3 appears in the view where the system is available but not active.

If the MOD system is turned OFF, the MOD icon 3 is hidden.

Moving Object Detection (MOD)
...

MOD system operation (models with 3D view)
The Moving Object Detection (MOD) system will activate automatically when any of the following conditions are met: Shift lever is placed in the R (Reverse) position. The CAMERA button is pressed to ...

Other materials:

Primary speed sensor
Exploded View Transaxle assembly O-ring Primary speed sensor : Always replace after every disassembly. : N·m (kg-m, in-lb) : Apply CVT fluid Removal and Installation REMOVAL  Remove the engine undercover. Refer to EXT-37, "ENGINE UNDER COVER : Removal and Ins ...

Repairing material
Foam Repair During factory body assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam insulators. URETHANE FOAM APPLICATIONS Use commercially available Urethane foam for sealant (f ...

Engine control system
Symptom Table SYSTEM — BASIC ENGINE CONTROL SYSTEM 1 - 6: The numbers refer to the order of inspection. (continued on next table) SYSTEM — ENGINE MECHANICAL & OTHER 1 - 6: The numbers refer to the order of inspection. ...

© 2014-2025 Copyright t32.nirogue.com