Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Basic information
Your vehicle includes two types of security systems designed to help protect the Nissan Rogue from unauthorized access:
- Vehicle security system (if so equipped)
- NISSAN Vehicle Immobilizer System
Vehicle Security System
Basic information
The vehicle security system activates both visual and audio alarms if any door, the hood, or the liftgate is opened while the system is armed. This system does not detect motion or vibration—it only responds to unauthorized entry.
The system helps deter theft of the Nissan Rogue, but it cannot fully prevent the theft of the vehicle or its components. Always lock your vehicle, never leave the keys inside, and secure it even when stepping away briefly.
Stay aware of your surroundings and try to park in well-lit, secure areas whenever possible.
Additional anti-theft devices—such as component locks, tracking systems, and identification markers—are available from automotive stores or your NISSAN dealer. Some of these features may also qualify you for insurance discounts.
How to arm the vehicle security system
1. Close all windows. The system can still be armed even if they remain open.
2. Remove the keys from the vehicle.
3. Close all doors, the hood, and the liftgate. Lock the doors using the Intelligent Key or the request switch (if equipped).
Even if the driver or passengers remain inside the Nissan Rogue, the system will activate once all doors, hood, and liftgate are locked with the ignition switch OFF. Switching the ignition to ON will deactivate the system.
Vehicle security system activation
The system triggers the following alarm response:
- The headlights or hazard lights will flash, and the horn will sound intermittently.
- The alarm will stop after about 30 seconds, but will reactivate if the vehicle is tampered with again.
The alarm activates when:
- Any door, the hood, or the liftgate is opened without using the Intelligent Key—even if unlocked manually from inside.
How to stop an activated alarm
The alarm can be stopped by pressing the UNLOCK
button on the Intelligent Key, using the door request switch (if equipped), or turning the ignition switch to the ON position.
Security systems
...
NISSAN Vehicle Immobilizer System
The NISSAN Vehicle Immobilizer System prevents the engine of the Nissan Rogue from starting without a registered Intelligent Key.
If the engine does not start with the registered key, interference may ...
Other materials:
P0966 pressure control solenoid B
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0966
PC SOLENOID B
(Pressure Control Solenoid B Control Circuit
Low)
When all of the following conditions are satisfied and this state is
maint ...
Wiring diagram
NAVIGATION WITHOUT BOSE
Wiring Diagram
...
Key switch signal circuit (without intelligent key)
Description
Transmits a key switch signal to the BCM.
Component Function Check
1. CHECK BCM INPUT SIGNAL
Select "Data Monitor" for "BCM" and check the "KEY ON SW" monitor value.
Is the inspection result normal?
YES >> Inspection End.
NO >> Refer ...
