Precautions on child restraints
WARNING
Even a strong adult cannot hold a child securely during a collision.
They must never be used to attach adult seat belts or other equipment. Misuse can damage the anchorages and prevent the child restraint from securing properly, increasing injury risk.
CAUTION
A child restraint left inside a closed vehicle can become very hot. Check the seating surface and buckles before placing a child in the restraint.
The Nissan Rogue is equipped with a universal child restraint anchorage system called LATCH (Lower Anchors and Tethers for CHildren). Some child restraints include rigid or webbing-mounted attachments compatible with these anchors.
For details, see “Lower Anchors and Tethers for CHildren (LATCH) system”.
If your child restraint is not LATCH-compatible, you may use the vehicle seat belts instead.
Manufacturers offer various child restraints for infants and small children. When choosing a restraint, keep these points in mind:
Choose a restraint appropriate for your child’s height and weight. Always follow all recommended procedures.
All U.S. states and Canadian provinces or territories require infants and small children to be restrained in approved child restraints at all times while the vehicle is in motion.
Canadian law requires the top tether strap on forward-facing child restraints to be secured to the designated anchor point in the vehicle.
Child restraints
Lower Anchors and Tethers for CHildren (LATCH) systemPreparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
Commercial Service Tools
Tool name
...
ECO mode switch (if so equipped)
ECO mode switch
The ECO mode helps to enhance the fuel
economy by controlling the throttle sensitivity and
transmission points.
To turn on the ECO mode, push the ECO mode
switch. The ECO mode indicator light (on the
speedometer) will remain lit while the mode is
active.
To turn off t ...
Shift lock system
Component Function Check
1.CHECK SHIFT LOCK OPERATION (PART 1)
Turn ignition ON.
Shift the selector lever to “P” position.
Attempt to shift the selector lever to any other than position
with the brake pedal released.
Can the selector lever be shifted to any other ...