Basic information
The adjustable luggage boards allow you to configure the cargo area of the Nissan Rogue in multiple ways, depending on your storage needs.
WARNING
Do not place objects heavier than 165 lbs (75 kg) on the load floor while it is in the upper position.
CAUTION

Before adjusting the rear (outer) luggage board, release the locks on both sides as shown.

Two-stage mode (if so equipped)
1. Lift the rear board upward 1 to approximately 30°.
2. Pull the board toward the rear 2 and slide it into the lower luggage space 3.
3. Lift the front (inner) board and store it similarly in the lower space 4.

Vertical mode
1. Raise the rear board to 90°.
2. Push downward until it locks into place.

Luggage under space
To access the under-floor storage, remove the rear board.
Glove box

WARNING
Keep the glove box closed while driving to avoid injury in a sudden stop.
Pull the handle to open the glove box. Push the lid firmly to close it until the lock engages.
Console box

To open the console box lids, press knob A rearward. To close, push each lid down until they latch.
If an object is placed on a lid, that side may not open—remove the obstruction and try again.
Lower console tray

CAUTION
Do not place objects in the lower console tray that could shift suddenly and cause injury during a collision or abrupt braking.
Sunglasses holder

WARNING
Keep the sunglasses holder closed while driving to prevent obstructing your view.
CAUTION
Push and release the holder to open it. Store only one pair at a time.
Card holder

Insert a card into the holder as shown.
Coat hooks

The coat hook is located above the rear side window in the Nissan Rogue.
Cup holders
Roof rackECU diagnosis information
AUTOMATIC BACK DOOR CONTROL UNIT
Reference Value
VALUES ON THE DIAGNOSIS TOOL
CONSULT MONITOR ITEM
TERMINAL LAYOUT
PHYSICAL VALUES
Fail Safe
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one
based on th ...
Symptom diagnosis
COMBINATION SWITCH SYSTEM SYMPTOMS
Symptom Table
Perform the data monitor of CONSULT to check for any malfunctioning
item.
Check the malfunction combinations.
Identify the malfunctioning part from the agreed combination and repair
or replace the part.
NORMAL OPERA ...
Air conditioner operation
Start the engine, turn the fan control dial to the
desired position, and press the
button to
activate the air conditioner. When the air conditioner
is on, cooling and dehumidifying functions
are added to the heater operation.
The air conditioner cooling function operates
only when the engin ...