Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Adjustable head restraint/headrest components
- Removable head restraint/headrest — the upper cushion that provides head support.
- Multiple notches — height adjustment points that lock into place.
- Lock knob — used to release the locking mechanism for removal or lowering.
- Stalks — support rods that fit into the seat frame.
Non-adjustable head restraint/headrest components
- Removable head restraint/headrest — fixed-height support cushion.
- Single notch — one locking point keeping the head restraint/headrest secured.
- Lock knob — releases the head restraint/headrest for removal.
- Stalks — support rods attaching it to the seat frame.
Remove
Use the following steps to remove the head restraint/headrest:
1. Pull the head restraint/headrest up to its highest position.
2. Press and hold the lock knob.
3. Lift and remove the head restraint/headrest from the seat.
4. Store it securely so it does not move freely inside the Nissan Rogue.
5. Reinstall and adjust the head restraint/headrest properly before someone uses that seating position.
Install
1. Align the head restraint/headrest stalks with the seat openings. Ensure correct orientation—the stalk with the adjustment notch 1 must go into the hole with the lock knob 2.
2. Press and hold the lock knob, then push the head restraint/headrest downward.
3. Adjust the head restraint/headrest to the proper height before using the seat.
Adjust
Basic information
For adjustable head restraint/headrest
Adjust the head restraint/headrest so its center aligns approximately with the center of your ears.
If your ear position is still above this level, raise the head restraint/headrest to the highest available notch.
For non-adjustable head restraint/headrest
Ensure the head restraint/headrest is correctly positioned with the lock knob fully engaged in the notch before using the seat.
Raise
To raise the head restraint/headrest, pull it upward.
Confirm the lock knob engages properly in the notch before riding in that seat.
Lower
To lower the head restraint/headrest, press and hold the lock knob while pushing it downward.
Ensure the lock knob is engaged in the notch before using the seating position.
Basic information
WARNING
Head restraints/headrests work together with other vehicle safety systems to help reduce the risk of injury.
They may provide additional protection in certain rear-end collisions. For maximu ...
Seat belts
...
Other materials:
Power supply and ground circuit
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis
Procedure
Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram".
1. CHECK FUSE
Check that the following fuse is not blown.
Is the fuse blo ...
Bluetooth® streaming audio with Navigation
System
If you have a compatible Bluetooth® audio device
that is capable of playing audio files, the
device can be connected to the vehicle’s audio
system so that the audio files on the device play
through the vehicle’s speakers.
Connecting Bluetooth® audio
To connect your Bluetooth® audio ...
Plug
Description
Replace the O-ring if oil leakage or exudes from the plug.
Exploded View
Transaxle assembly
O-ring
Plug
: Always replace after every
disassembly.
: N·m (kg-m, ft-lb)
: Apply CVT fluid
Removal and Installation
REMOVAL
Partially remove front fender prote ...
