Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Active noise cancellation (if so equipped)/Active sound enhancement

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide / Starting and driving / Active noise cancellation (if so equipped)/Active sound enhancement

Nissan Rogue. Active noise cancellation (if so equipped)/Active sound enhancement

NOTE:

To ensure proper operation of the active noise cancellation and active sound enhancement systems:

Do not cover the speakers or woofer.
Do not cover the microphones.
Do not modify or replace speakers, the woofer, or audio-related components such as the amplifier.
Do not add sound-deadening materials or perform any modifications near the microphones, speakers, or woofer.

Active noise cancellation

The active noise cancellation system uses microphones 1 inside the cabin to detect low-frequency engine booming sounds. The system then generates counteracting, muted engine noise through the speakers 2 and woofer 3 to reduce the perceived engine booming inside the vehicle.

If the microphones 1 or their surrounding area are tapped or struck, abnormal sounds may be emitted from the speakers. This is normal when the system is disturbed.

Active sound enhancement

The active sound enhancement system creates additional engine sound through the speakers 2 and woofer 3, adjusting its tone according to engine speed and the selected driving mode. This enhances the overall sound quality and driving experience.

Cold weather driving

Freeing a frozen door lock To help prevent a frozen door lock, apply deicer through the key hole before freezing occurs. If the lock becomes frozen, gently heat the key before inserting it into the ke ...

In case of emergency

...

Other materials:

C1729 vehicle speed signal
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTC ...

Air flow charts
The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air recirculation indicator should always be in the OFF position for heating and defrosting. ...

C1170 variant coding
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1170 VARIANT CODING When the information in ABS actuator and electric unit (control unit) is not the same. ABS actuator and electric unit (control unit) DTC ...